Want to know how to launch an e-scrap recycling project from the ground up?

Attend TMS 2024 to find out why ISACYCLE™ is the cleanest, most efficient method of copper recycling on the market today.

You can also learn how to reduce your emissions and cut your operating costs with ISACONVERT™.

Our ISACYCLE™ and ISACONVERT™ presentations are your chance to learn more about our ISASMELT™ technology innovations and to network with our team of experts. So reserve your spot at these two events below!

Senior Metallurgist Dr Stuart Nicol and Senior Mechanical Engineer Jackson Emmett will be there for the duration of the conference, ready to answer your questions.

 

Presentations

How To Recover Critical Metals from Consumer Products Using ISACYCLE™

Date: Monday 4th March 2024
Time: 12:15 - 13:30 hrs
Location: Hyatt Regency Orlando, Celebration 5 room


Join Dr Stuart Nicol, as he discusses how to launch an e-scrap or secondary copper recycling project from the ground up.

As e-scrap and copper recycling become a global focus, operations are turning to proven technologies to assist with upgrading their own operations.

The ISASMELT™ and ISACYCLE™ are proven, effective technologies that can be applied to e-scrap projects of any size.

Producing products and by-products with minimal waste product, the ISASMELT™ is the cleanest, most efficient method of copper recycling on the market today.

Learn the chemistry and the overall flowsheet behind an e-scrap and secondary copper recycling facility.

Then explore the advantages and disadvantages of different techniques, equipment, and furnaces in this unmissable workshop.

And have the opportunity to connect with the ISASMELT™ team to discuss your own projects and get advice from the experts on how to develop your own e-scrap project.

Register now, get involved in this exclusive session and one-on-one discussion with Glencore Technology's experts to discuss implementing the ISACYCLE™ to your projects.

 

Register Now!

Register "How To Recover Critical Metals from Consumer Products Using ISACYCLE™"!

Click to secure your place

How to Reduce your Emissions and Cut your Operating Costs with ISACONVERT™

Date: Wednesday 6th March 2024
Time: 12:15 - 13:30 hrs
Location: Hyatt Regency Orlando, Celebration 5 room


ISACONVERT™ takes proven ISASMELT™ technology and applies it to converting.

The result is a lower-cost, higher-performance, and more environmentally responsible continuous converter.

ISACONVERT™ will help you fulfil your ESG goals and exceed your operating expectations.

This presentation will explore the ISACONVERT™ technology in the context of converting copper matte to a low sulphur blister copper.

Led by our presenter, Senior Metallurgist Dr. Stuart Nicol, you will learn about the environmental performance of the ISACONVERT™ and how it can be integrated into an existing or new copper smelting flowsheet.

Stuart will walk you through the benefits of the technology when it is successfully installed, as well as discuss what to consider when incorporating the ISACONVERT™ into your flowsheet.

You will also learn more about the successful implementation of the ISACONVERT™ at Kansanshi Mining PLC in Zambia.

And you will have the opportunity to book a one-on-one discussion with Glencore Technology’s experts to discuss implementing the ISACONVERT™ in your operation.

Register now, get involved in this exclusive session, and learn more about the ISACONVERT™. It is a clean, efficient, easy-to-use, and low-cost technology.

Register Now!

Register for "How to Reduce your Emissions and Cut your Operating Costs with ISACONVERT™"!

Click to secure your spot

Our TMS 2024 Team

Stuart Nicol

Senior Metallurgist

Stuart is a Senior Metallurgist in the Pyrometallurgical team at Glencore Technology, specialising in ISASMELT™ and ISASMELT™ related technologies.

With over 10 years of experience in pyrometallurgy, Stuart has experience in both the design and operation of metallurgical plants across multiple commodities and processes.

He earned his PhD at the University of Queensland in PYROSEARCH, focusing his research on phase equilibria and reaction kinetics applicable to industrial operations.

Stuart’s current role includes the development and study of basic and detailed engineering projects, and site construction and commissioning for the ISASMELT™, ISACONVERT™, BBOC™ and other Glencore Technology owned technologies.

Jackson Emmett

Senior Mechanical Engineer 

Jackson Emmett is the Lead Mechanical Engineer for the Albion Process™ & Hydrometallurgy projects at Glencore Technology.

He has 20 years of experience in mining and metals and has been with Glencore Technology since 2018.

Jackson and the Albion Process™ team have developed the OxiLeach™ series of leach reactors in a variety of sizes to suit any application and throughput.

eBrochures

ISASMELT™ eBrochure
Click here to download
ISACYCLE™  ​​​​​​​eBrochure
Click here to download
ISACONVERT™ ​​​​​​​eBrochure
Click here to download

Do you have questions you want to be answered during TMS 2024? Reach out to our team! Complete the form below and we’ll be in touch.



In submitting, you agree to opt-in to receive any relevant news about innovations, technologies, installations and more. You can choose to unsubscribe at any time.



We do not share your personal information with third parties. Glencore Technology is committed to protecting your privacy and will deal with your personal information in accordance with our Privacy Policy



Fields marked with * are mandatory.


Our Technologies